Shop
Showing all 20 results
-
By Cookware Type (20)
-
By Part (20)
-
2 1/3 Quart Tea Kettle Cap & Trigger
DetailsMaterial: Bakelite, stainless steel
Includes: Replacement cap & trigger and necessary hardware
Fits: Revere Ware 2 1/3 quart tea kettles (models 2701, 2901, 2722, and 2712)
-
2 1/3 Quart Tea Kettle Handle
DetailsThese are replacement handles for 2 1/3 quart Revere Ware tea kettles. Note that they will not work on other sized kettles.
Material: Bakelite, stainless steel
Includes: One handle + hardware
Fits: 2 1/3 quart Revere Ware tea kettles originally made under the following model numbers: 2701, 2901, 2722, and 2712.
-
Lid knob
DetailsMaterial: Bakelite, brass
Includes: Bakelite knob with brass screw insert. A separate screw is NOT included as all Revere lids have a screw attached to them.
Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall
Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob.
-
Pot/dutch oven handle pair (single screw)
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + two screws. Each order includes two handles, enough for one pot
Measurements: Approximately 3.0 in (75.5 mm) x 1.25 (32 mm) x 1.5 in in (38 mm)
Fits: Newer era pots and Dutch ovens that use a single screw that screws directly into the side of the pot. If your pot handles look like these, they should fit.
-
Vintage pot/dutch oven handle pair (2-screw)
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + four screws. Each order includes two handles, enough for one pot
Measurements: 3.33 in (85 mm) long, 0.68 in (17 mm) thick, holes are 1.5 in (38 mm) apart on center
Fits: Vintage era pots and Dutch ovens. If your pot handles look like these, they should fit.
-
X-Large 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 5.7 in (145 mm) long, 3.7 in (95 mm) between holes on center. Fits a metal spline approx 3/4 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 8 in pans, 10 in & 12 in skillets, 10 in square skillets, large griddles, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Large 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 5.25 in (130 mm) long, 3.1 in (79 mm) between holes on center. Fits a metal spline approx 3/4 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 7 in pans, 8 in skillets, 9 in square skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Medium 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 4.6 in (117 mm) long, 2.6 in (66mm) between holes on center. Fits a metal spline approximately 5/8 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 5 ½ in and 6 in pans, 7 in skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Small 2-screw pan handle
DetailsPLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR PAN! SEE THE MEASUREMENTS BELOW (ESPECIALLY THE SPLINE SIZE). THIS SIZE FITS VERY FEW PAN SIZES.
Material: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 4.5 in (115 mm) long, 2.75 in (70 mm) between holes on center. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 6 in skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
These fit a limited number of pans/skillets and fit a 3/8 in metal spline that is smaller than the 5/8 (medium handle) or 3/4 in spline (large, x-large) most Revere Ware skillets and pans have. Please make sure your pan has the smaller spline these handles are made for.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 2-screw handle hardware set (med, lg, x-lg handles)
DetailsMaterial: Stainless steel
Includes: Two nuts, two screws, and a hanging hook
Fits: Vintage era medium, large, and x-large skillet and pan handles (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
If you are looking for a new hardware set for your 2-screw Revere Ware handle, this is mostly likely the one you need; this set fits 99% of all the 2-screw handles. This hardware set is specifically made for the medium, large, and x-large sized handles. We also sell a small hardware set which only fits the small handle; the small handle fits very very few cookware pieces.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 2-screw handle hardware set (small handles)
DetailsMaterial: Stainless steel
Includes: Two nuts, two screws, and a hanging hook
Fits: Vintage era small pan handles (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
These will only work with the small two-screw vintage style handle. These screws and nuts will not fit in the larger handle sizes or the single screw newer handle. Only 1% or less of the Revere Ware cookware requires the small handle. If you think you have a small handle, please check it against the measurements of our small handle before ordering this hardware set.
Please see the detailed information about this part (the “See details” link under the images) to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 1-screw handle hardware set (all sizes)
DetailsMaterial: Stainless steel
Includes: One screw, one barrel nut, one lock washer.
Fits: Newer era small pan handles (definition of skillet, pan, etc. here). These fit post-1968 era Revere Ware pans with handles that have one screw through the metal part sticking out of the pan metal part of the handle. See the product details for a picture of the type of handle these fit.
These screws will only work with the single screw newer style handle. These screws and nuts will not fit in the older two-screw handles.
-
Vintage 4-quart pressure cooker gasket
DetailsMaterial: Food grade silicone rubber
Includes: Gasket only
Measurements: 8 in (200mm) in diameter, 0.59 in (16mm) thick.
Fits: Vintage era 8 inch 4 quart pressure cookers. See pictures below to make sure yours looks like them.
This gasket will only fit the older 4 quart pressure cooker. This gasket will not fit newer 4 quart and 6 quart pressure cookers characterized by the heavy metal pressure regulator made to look like a Revere Ware nob.
-
4-quart 1574 model pressure cooker gasket
DetailsMaterial: Food grade silicone rubber
Includes: Gasket only
Measurements: 9 in (229 mm) in diameter, 0.44 in (11 mm) thick.
Fits: 1970’s era model 1574 4 quart pressure cookers. See pictures to make sure yours looks like this model.
This gasket will only fit the 1574 model 4 quart pressure cooker. This gasket will not fit vintage 4 quart or newer 1576 and other 6 quart pressure cookers.
-
6-quart 1576 model pressure cooker gasket
DetailsMaterial: Food grade silicone rubber
Includes: Gasket only
Measurements: 11 in (281 mm) in diameter, 0.49 in (12 mm) thick.
Fits: 1970’s era model 1576 6 quart pressure cookers. See pictures to make sure yours looks like this model.
This gasket will only fit the 1576 model 6 quart pressure cooker. This gasket will not fit vintage 4 quart or newer 1574 and other 4 quart pressure cookers.
-
X-Large 1-screw pan handle
DetailsMaterial: Bakelite, stainless steel, aluminum
Includes: One handle + hardware set
Measurements: 6.2 in (158 mm) long overall, 5.4 in (137 mm) long Bakelite
Fits: Newer style 4 quart sauce pans and similar handled steamer baskets, 9 inch, 10 inch, and 12 inch skillets; both copper
bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here).These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Please see the product details for more information.
-
Large 1-screw pan handle
DetailsMaterial: Bakelite, stainless steel, aluminum
Includes: One handle + hardware set
Measurements: 5.6 in (142 mm) long overall, 4.8 in (122 mm) long Bakelite
Fits: Newer style 2 quart and 3 quart sauce pans and similar handled steamer baskets, 8 inch skillets; both copper
bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here).These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Please see the product details for more information.
-
Medium 1-screw pan handle
DetailsMaterial: Bakelite, stainless steel, aluminum
Includes: One handle + hardware set
Measurements: 5.1 in (130 mm) long overall, 4.3 in (110 mm) long Bakelite
Fits: Newer style 1 1/2 quart and 2 quart sauce pans and handled steamer baskets, 7-inch and 7 1/4 inch skillets; both copper
bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here).These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Please see the product details for more information.
-
Small 1-screw pan handle
DetailsMaterial: Bakelite, stainless steel, aluminum
Includes: One handle + hardware set
Measurements: 4.9 in (126 mm) long overall, 4.1 in (105 mm) long Bakelite
Fits: Newer style 3/4 quart, 1 quart, and 1 1/2 quart sauce pans, 6-inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware cookware with handles that have one screw through the metal part of the handle. Please see the product details for more information.
-
Fitz-All Large Glass Percolator Top
DetailsMaterial: Glass, aluminum
Includes: Glass knob and screw ring
Fits: All Revere stove-top percolators with a glass knob (that have a hole size between 1 1/2 and 2 1/4 inches)
Note that newer shipments of this part have a slightly different backing card that is in RED. It is the same part.