Sauce Pans - 2-screw style
With Sauce pans, it is very hard to determine the required handle size by either the measurements of the pan or the markings on the bottom. With the 2-screw style, it is very important that you order the correct handle as they are a very specific fit. Check the measurements of the Bakelite part of the handle, the distance between the centers of the holes, and the size of the metal spline the handle goes on against our stated measurements to insure a proper fit.
Showing all 7 results
-
Lid knob
DetailsMaterial: Bakelite, brass
Includes: Bakelite knob with brass screw insert. A separate screw is NOT included as all Revere lids have a screw attached to them.
Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall
Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob.
-
X-Large 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 5.7 in (145 mm) long, 3.7 in (95 mm) between holes on center. Fits a metal spline approx 3/4 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 8 in pans, 10 in & 12 in skillets, 10 in square skillets, large griddles, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Large 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 5.25 in (130 mm) long, 3.1 in (79 mm) between holes on center. Fits a metal spline approx 3/4 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 7 in pans, 8 in skillets, 9 in square skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Medium 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 4.6 in (117 mm) long, 2.6 in (66mm) between holes on center. Fits a metal spline approximately 5/8 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 5 ½ in and 6 in pans, 7 in skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Small 2-screw pan handle
DetailsPLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR PAN! SEE THE MEASUREMENTS BELOW (ESPECIALLY THE SPLINE SIZE). THIS SIZE FITS VERY FEW PAN SIZES.
Material: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 4.5 in (115 mm) long, 2.75 in (70 mm) between holes on center. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 6 in skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
These fit a limited number of pans/skillets and fit a 3/8 in metal spline that is smaller than the 5/8 (medium handle) or 3/4 in spline (large, x-large) most Revere Ware skillets and pans have. Please make sure your pan has the smaller spline these handles are made for.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 2-screw handle hardware set (med, lg, x-lg handles)
DetailsMaterial: Stainless steel
Includes: Two nuts, two screws, and a hanging hook
Fits: Vintage era medium, large, and x-large skillet and pan handles (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
If you are looking for a new hardware set for your 2-screw Revere Ware handle, this is mostly likely the one you need; this set fits 99% of all the 2-screw handles. This hardware set is specifically made for the medium, large, and x-large sized handles. We also sell a small hardware set which only fits the small handle; the small handle fits very very few cookware pieces.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 2-screw handle hardware set (small handles)
DetailsMaterial: Stainless steel
Includes: Two nuts, two screws, and a hanging hook
Fits: Vintage era small pan handles (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
These will only work with the small two-screw vintage style handle. These screws and nuts will not fit in the larger handle sizes or the single screw newer handle. Only 1% or less of the Revere Ware cookware requires the small handle. If you think you have a small handle, please check it against the measurements of our small handle before ordering this hardware set.
Please see the detailed information about this part (the “See details” link under the images) to see any special considerations for this part and ways in which they differ from original Revere Ware parts.