There have been a rash of bounces backs lately for customer service emails people have sent me. I feel bad because they are probably thinking we didn’t answer their request. Please take care to enter your proper email address when filling out our contact form. So I’ll post the answers here and clear my conscience. 🙂
Jane asks:
I am wondering what the weight is of RW muffins pans ? I have seen for sale the 2516 h90A – and other pans with a different h number- I am looking for an 18/10 SS pan – your help in figuring out the weight of the pans I have seen – their numbers and what they mean would be appreciated.
I’ve never owned a Revere Ware muffin pan so unfortunately have no idea of their weight. I also have no idea about the numbers off the top of my head but I am always willing to take a look if you send me a pciture; perhaps it will spark something.
Marsia asks:
My Revereware copper bottom 10″ skillet has a 1/2″ spline. I have no idea what year it was made.
The handle has been missing for years, so I don’t know if it had one or two screws,
What size should I order to replace the handle.
I would need a picture of the skillet to better assess. I can’t recall every seeing a 1/2″ spline.
Renilda asks:
I have an old Revere Ware Dutch oven. The handle on one side fell off. I have the handle, bracket, and screw, but can’t figure out how to get it to stay back on. Also have been unsuccessful in finding any videos of how to do it. Can you help? Thank you!
The handle brackets were likely spot welded on. The only way to repair them would be to take them
to a welder or machine shop and ask them to weld or braze the brackets back on.
Here is our information on that type of repair:
Sandi asks:
I’m sitting here with a tape measure and my handle off my small pot (1970 wedding gift) and I’m 99% positive I need the screws (hardware) for the smaller handle. But! I want to be positive so, could you please tell me what the heck a ‘spline’ is? Thank you! Sandi
The spline is the metal piece that the two handle halves attach to.
It is the long and thin part that comes off the side of the pot. The small handles
go onto a spline that is 3/8” “tall” which is the measurement from the bottom side
of that metal piece (toward the stove) to the top side (towards the ceiling).
Any other size (5/8” or 3/4”) will require the M/L/XL hardware set.
No comments yet.